HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

OperationOutput character string
• If the target is ObjectName
Makes the name of the SMI-S enabled storage system the target.
• If the target is StorageArray
Makes only the SMI-S enabled storage system the target.
• If the target is URLLink
Makes only the URL of the management server for the SMI-S enabled
storage system the target.
smi-s
Splits the pair.
split
Creates a 3DC pair by using Continuous Access Journal.
suspend
Either replaces the WWN or keeps the existing WWN, because the
specified WWN is the same as a WWN that is already registered.
takeOverWWN
Disassociates a THP/Smart volume from a THP/Smart pool.
unassign
Deletes the virtual LDEV information from a virtual LDEV.
unmapVAttr
Deletes the virtual device number from a virtual LDEV.
unmapVID
Modifies an existing pair configuration.
update
Does not validate HORCM files when modifying a pair.
validate:false
Validates HORCM files when modifying a pair.
validate:true
Returns a completion response after the database is updated.
waitingViewSynchro
Does not set virtual LDEV information for a virtual LDEV.
withoutVAttr
Does not set a virtual device number for a virtual LDEV.
withoutVID
Performs zero page reclaim to release unused capacity.
ZeroPageReclaim
Parameters in message details
The format and content of the parameters (parameter, above) output in message details are described
below.
Parameter format 1 (nested):
<element attribute>[parameter-1 parameter-2...parameter-n]</element>
The parameters that depend on the element are output between the start and end tags of element.
If no relevant parameters exist, no parameters are output.
Parameter format 2 (non-nested):
Administrator Guide (Web Version) 273