HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
• Set the same value as the hdc.rmiregistry property of the Device Manager server (when
non-SSL communication is used by Host Data Collector and the Device Manager server).
Related topics
• Registering an exception for the Host Data Collector service (for non-SSL communication), page 84
• hdc.rmiserver, page 342
• hdc.ssl.secure, page 372
hdc.common.rmi.serverPort
Specify the non-SSL communication port number of the RMI server.
Specifiable range: 1 to 65535.
Default: 22099
NOTE:
If you changed the value of this property, the following settings must be performed:
• Use the firewall_setup command to reset the firewall exemptions (when the value of the
hdc.ssl.secure property is 1 or 2).
• Set the same value as the hdc.rmiserver property of the Device Manager server (when non-
SSL communication is used by Host Data Collector and the Device Manager server).
Related topics
• Registering an exception for the Host Data Collector service (for non-SSL communication), page 84
• hdc.rmiserver, page 342
• hdc.ssl.secure, page 372
hdc.common.http.serverPort
Specify the non-SSL communication port number of the class loader.
Specifiable range: 1 to 65535.
Default: 22100
Administrator Guide (Web Version) 369