HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

Figure 14 Example of a system configuration for managing copy pairs (when copy pairs are defined
in a configuration definition file)
Management server conditions:
The following computers must be registered as the Device Manager management resources:
• A host that recognizes the P-VOL
• A host that recognizes the S-VOL
Pair management server conditions:
• Device Manager agent version 7.1 or later must be installed on the pair management server.
• RAID Manager version 01-25-03/01 or later must be installed on the pair management
server.
Copy pair (P-VOL and S-VOL) conditions:
• The P-VOL and S-VOL must be managed by a single management server (Device Manager
server).
• From the P-VOL and S-VOL, LUN security must be set for the host (application server).
The management server does not need to recognize the P-VOL or S-VOL.
• The P-VOL and S-VOL must be recognized by the hosts (application servers).
HP recommends that P-VOL and S-VOL be assigned to separate application servers.
Resource group requirements (when managing partitioned resources in HP XP7 or P9500):
• The volumes below must be registered in a resource group managed by the user.
- P-VOL
- S-VOL
- All pool volumes that make up a pool (when managing Snapshot or Fast Snap pairs)
System configuration and requirements54