HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

Figure 15 Example of a system configuration for managing copy pairs (when copy pairs are defined
as a device group)
Management server conditions:
• The following computers must be registered as the Device Manager management resources:
- A host that recognizes the P-VOL
- A host that recognizes the S-VOL
• Device Manager agent version 7.1 or later must be installed on the management server.
• RAID Manager version 01-25-03/01 or later must be installed on the management server.
• The Replication Manager server and the Device Manager server can communicate using SSL.
• Either of the conditions below is satisfied on the management server.
- Neither the P-VOL nor S-VOL is assigned.
If you want to create a copy pair from the management server, specify enable for the
server.agent.rm.centralizePairConfiguration property of the Device Manager
agent on the management server (default: disable).
- The server.agent.rm.ignorePairStatus property for the Device Manager agent on
the management server must be set to true.
If you want to check the latest copy pair information by using the Device Manager GUI or
CLI, refresh the storage systems by using the following methods:
GUI: In the storage system view, select the target storage system, click the Refresh Storage
System button.
CLI: Execute the AddStorageArray command for the target storage system.
Copy pair (P-VOL and S-VOL) conditions:
• The P-VOL and S-VOL must be managed by a single management server (Device Manager
server).
System configuration and requirements56