Manualshelf

HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

ManualsBrandsHP ManualsSoftwareHP XP Array Manager Enterprise Media Kit
61626364656667686970
DescriptionPort number
Used internally for Common Component communication (receiving a termination
message from the Web server).
This port number can be changed.
22018/tcp
Used internally for Common Component communication (communication with
the Web server).
This port number can be changed.
22025/tcp
Used internally for Common Component communication (receiving a termination
message from the Web server).
This port number can be changed.
22026/tcp
Used internally for Common Component communication (single sign-on).
This port number can be changed.
22031/tcp
Used internally for Common Component communication (HiRDB).
This port number can be changed.
22032/tcp
Used internally for Common Component communication (communication with
the Web server).
This port number can be changed.
22033/tcp
Used internally for Common Component communication (receiving a termination
message from the Web server).
This port number can be changed.
22034/tcp
#:
This port is also used when SSL is enabled. To interrupt non-SSL communication from outside the
network to the management server, you need to edit the user_httpsd.conf file.
Related topics
• Changing ports used by Common Component, page 69
• Registering firewall exceptions for Device Manager and Tiered Storage Manager, page 74
Ports used by the Device Manager server
For the management server, ensure that the port numbers specified for use by the Device Manager
server are different from the port numbers used by other programs installed on the same computer.
Table 11 Ports used by the Device Manager server
DescriptionPort number
Used for receiving SNMP traps from HP XP7, P9500, XP24000/XP20000,
XP12000/XP10000/SVS200, and XP1024/XP128.
You cannot change the settings by using Device Manager. If products using these
ports are installed on the same computer, change the settings of those products.
162/udp
Used for communication with a CIM client (service discovery).
You cannot change the settings by using Device Manager. If products using these
ports are installed on the same computer, change the settings of those products.
427/tcp
Network configuration64