HP XP7 Command View Advanced Edition Administrator Guide (Web Version) (TK981-96004, May 2014)

Related topics
• Starting the Host Data Collector service, page 169
• Stopping the Host Data Collector service, page 169
• Registering an exception for the Host Data Collector service (for non-SSL communication), page 84
• hdc.common.rmi.ssl.registryPort, page 370
• hdc.common.rmi.ssl.serverPort, page 370
• hdc.common.https.serverPort, page 371
Network settings with multiple IP addresses
This section describes communication settings for multiple network configurations.
Network settings for using a management server as a bridge
To use the management server as a network bridge by installing multiple network interface cards
(NICs) on the server, set up the networks so that the management server, management client, and
storage systems can mutually communicate.
The sections where settings must be specified are explained by using the configuration example shown
below.
Figure 16 Example of a configuration in which the management server is used as a bridge between
networks
Set up the routers, the management client, and the management server so that the devices can mutually
communicate as indicated by the arrows in the above figure.
• Storage system and the management client
• Storage system and the management server
Network configuration86