HP XP7 Replication Manager Application Agent CLI User Guide (TK981-96015, May 2014)

The following table lists the parameters defined in the definition file for the cascade configuration.
Table 46 Parameters defined in the definition file for the cascade configuration
Omission
Maximum
character
length
Description
#2
Parameter
#1
N
66
(including [
and ])
Indicates the site name and the
beginning of a section.
Everything from [site-name] to the end
of the file, or to the line immediately
above the next [site-name] is treated
as one section.
site-name can consist of up to 64
alphanumeric characters, although the
first character must be an alphabetic
character.
#3
[site-name]
N255
Specify the database server name
specified in the -cascade option of the
backup command in the form of a host
name or IP address.
When specifying a host name for this
parameter, use a physical host name.
DB_SERVER
N255
Specify the backup server name spe-
cified in the -cascade option of the
backup command in the form of a host
name or IP address.
BK_SERVER
N10
Specify the number of the RAID
Manager instance that is managing
Remote Copy in the cascade
configuration.
All of the Remote Copy copy groups
must be managed by this instance. If
you are using VSS to perform the
backup, the instance specified in this
parameter must be the same as the
instance that is being managed by
Application Agent.
INSTANCE_NUMBER
N10
Enter the number of Remote Copy copy
groups in the cascade configuration.
COPY_GROUP_NUM
N64
Enter the names of the Remote Copy
copy groups in the cascade
configuration.
You can specify this parameter more
than once (using one specification per
line). However, the number of times this
parameter is specified must match the
number of copy groups specified in the
COPY_GROUP_NUM parameter.
COPY_GROUP
Application Agent CLI User Guide 151