HP XP7 Replication Manager Application Agent CLI User Guide (TK981-96015, May 2014)

• Continuous Access Synchronous is configured between disks P1 and P3, and between disks P2
and P4.
• Using the RAID Manager configuration definition file, the pair definitions on the database server
and backup server have been completed for the primary and secondary volumes.
• Using the RAID Manager configuration definition file, the pair definitions for remote copying
between the primary volume at the local site and the primary volume at the remote site (secondary
volume/primary volume) have been completed.
• The secondary volumes are mounted only when needed, at the following mount locations:
• Disks S1 and S3 are mounted as W: drives.
• Disks S2 and S4 are mounted as X: drives.
Backing up concurrently at both local and remote sites
The following subsections give an example of backing up both the local site and the remote site
concurrently.
Operation at the local site
Execute VSS backup to back up data concurrently to the secondary volumes at both the local and
remote sites.
Execute the drmexgbackup command on database server A:
An unused backup ID is assigned to each server. For this example, we assume 0000000001 as the
backup ID at the local site, and 0000000011 as the backup ID at the remote site.
DBServer A > drmexgbackup -mode vss -cascade -auto import -auto mount G:
KAVX0001-I The drmexgbackup command will now start.
KAVX5412-I The values in the following section of the definition file
for the cascade configuration will be used.
Local site = LOCALSITE
Remote site = REMOTESITE
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = name-of-backup-server-A
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = name-of-database-server-B
KAVX1600-I Backup processing will now start.
KAVX5400-I Backup pre-processing will now be performed
by using name-of-backup-server-B.
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = name-of-backup-server-B
KAVX0257-I The connection with the Protection Manager service will now be terminated.
Host name = name-of-backup-server-B
KAVX5401-I Backup pre-processing was performed by using name-of-backup-server-B.
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG001,B001
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG002,B001
KAVX5403-I Processing to resynchronize a copy group will now be performed by using name-of-database-server-B.
KAVX0256-I A connection to the Protection Manager service will now be established.
Host name = name-of-backup-server-B
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG003,B001
KAVX5108-I Resynchronizing a copy group.
Copy group name = EXG004,B001
KAVX0257-I The connection with the Protection Manager service will now be terminated.
Host name = name-of-backup-server-B
KAVX5404-I Processing to resynchronize a copy group was performed
by using name-of-database-server-B.
KAVX1610-I Verification of the database on the backup server will now be performed.
Storage group name = 1st
File size = 3 MB
KAVX1611-I Verification has finished successfully.
KAVX5405-I Backup post-processing will now be performed by using name-of-database-server-B.
Application Agent CLI User Guide 429