HP StorageWorks P9000 for Business Continuity Manager Software Installation Guide (T5253-96052, May 2011)

5. In the Manage Licenses panel, enter the license key dataset name
(BCM.LICENSE.KEYSFROM.HP) in the License Key Dataset Name field and press Enter.
The license keys are read from the license key file and are installed in the license information
dataset. The license key file also contains license keys for programs other than Business
Continuity Manager and for multiple storage systems. However, this operation collectively
installs only license keys for Business Continuity Manager.
The YK9001I message is output if the license key is installed correctly.
6. Use the Manage Licenses panel to confirm that the licenses have been installed correctly.
Directly Entering a Key Code
With this method, you directly enter a key code in the Manage Licenses panel to install the license.
For details about the panel used in the following procedure, see the HP StorageWorks P9000 for
Business Continuity Manager Software Reference Guide.
To directly enter a key code:
1. Create a license information dataset.
For details about the attributes of license information datasets, see “Format for License
Information Datasets” (page 44). For details about license information dataset names, see
“Naming Conventions for License Information Datasets” (page 44).
2. Start Business Continuity Manager.
3. Display the Main Menu panel and select 2 Manage Licenses.
The Manage Licenses panel appears.
4. In the Manage Licenses panel, enter the key code in the Key Code field and press Enter.
The key code is installed in the license information dataset as the license key.
The YK9001I message is output if the license key is installed correctly.
5. Use the Manage Licenses panel to confirm that the licenses have been installed correctly.
Notes When Operating License Keys
Operating license keys notes are as follows:
• You cannot use license keys obtained for Business Continuity Manager 05.03 or earlier.
• Do not delete the license information dataset. Business Continuity Manager requires the license
information dataset, and if it is deleted, Business Continuity Manager cannot be used.
• Do not use editors or similar applications to edit the license information dataset. Doing so
may result in Business Continuity Manager becoming inoperable.
• If the specified license key is invalid, all or part of Business Continuity Manager will not be
available. Make sure that you enter the correct license key.
• If an I/O error occurs in the license dataset, it is assumed that no license key exists.
• If you use the YKSETENV command to set or change the license information dataset name
while Business Continuity Manager is running, CLI commands that are being executed will be
executed using the previously set value. The set or updated license information dataset name
will take effect once the YKLOAD command is executed.
• Hyphens cannot be used for the license key dataset name.
• Temporary license keys and emergency license keys that exceed a license period of 17
September 2042 cannot be installed.
Installing Business Continuity Manager 43