HP P9000 Command View Advanced Edition Suite Software 7.4.1-00 Release Notes (TB581-96338, March 2013)

Creating a pool
The error message Failed:AsynchronousProcessCounter#decrement (KAIC16993-E)
might appear when one of the following operations is continuously performed in the Create Pool dialog
box.
• Addition of tiers
• Deletion of tiers
• Addition of parity groups
• Deletion of parity groups
If this occurs, close the Create Pool dialog box, and then retry the operation.
Open operation for Create Pool dialog box or Expand Pool dialog box after selecting
a storage system in which no supported drive for Device Manager is installed
After a storage system in which no supported drive for Device Manager is chosen, and then the Create
Pool dialog box or Expand Pool dialog box is opened, the KAIC15055-E error appears.
If this occurs, disregard this message.
Create Pool dialog box or Expand Pool dialog box
While performing operations in the Create Pool dialog box or the Expand Pool dialog box, the
KAIC16981-E error dialog box appears.
If this occurs, select the OK button in the error dialog box and continue with the operations.
Registering a Solaris 10 host using Host Data Collector
A zpool_history_<zfs pool name>-<1– to 6–digit number>.rst file with a file size
of 0 bytes is created in the /tmp directory on the Solaris 10 host when you:
• Register a host, or update host information.
• Have a ZFS pool name that is longer than 98 bytes.
When you run the target host log gathering tool (TLC), the file zpool_history_<zfs pool
name>-<1– to 6–digit number>.rst and the file <any character>-<1– to 6–digit
number>.rst (size: about 250 + 50*disk number that consists pool byte) might be created in the
same directory where you ran the TLC tool.
Delete these files from the directory after registering hosts, updating host information, or running TLC.
Filter values in the filter dialog box
If a filter attribute is changed before its filter value in the filter dialog box is shown, the filter value
might be inconsistent.
If this occurs, redisplay the filters, or log in again. If the inconsistent filter value appears after refreshing
the screen, set up a filter value again after applying a filter with a different attribute.
Registering HP-UX 11iv2 (IPF and PA-RISC) and 11iv3 (PA-RISC) hosts by using Host
Data Collector
Registering or refreshing HP-UX 11iv2 (IPF and PA-RISC) and 11iv3 (PA-RISC) hosts times out if a stale
NFS mount exists on the target host. The following error message occurs when registering hosts of the
same target host:
ERR_1202: Unable to copy all the files to the remote server. (Remote
server: <Target host IP address>, Cause: Error during SCP transfer.)
If this error persists, check whether a Host Data Collector binary process exists on the target host by
executing the following command:
Important considerations 31