HP P9000 Replication Manager Software 7.3.1-00 Configuration Guide

Installation of Device Manager Agent
Make sure Device Manager Agent is installed on both pair management servers that manage a
primary and secondary volume.
Link between Device Manager server and Device Manager Agent
Make sure Device Manager Agent links correctly with Device Manager server using the
hdvmagt_account command. If the link is incorrect, execute this command on the pair management
server to change the settings.
1. Log in to the pair management server as a user with Administrator or super user permissions. If
the OS you are using is Windows Server 2008 x86, Windows Server 2008 x64, or Windows
Server 2008 R2, start the command prompt as Administrator.
2. Execute the hdvmagt_account command and make sure the Device Manager agent is correctly
linked to the Device Manager server.
For Windows:
<Device-Manager-agent-installation-folder>¥bin¥hdvmagt_account.bat
For Linux or HP-UX:
/opt/HDVM/HBaseAgent/bin/hdvmagt_account
3. If the agent is not correctly linked to the server, enter the following information in response to the
command request:
IP address or host name
Specify the IP address or host name of the Device Manager server.
• Specifying an IP address:
In IPv4, specify the address in dotted-quad form.
In IPv6, specify the address by using hexadecimal numbers delimited by colons. Abbreviated
forms can also be used.
• Specifying a host name: Specify the host name by using a string of up to 50 bytes. The fol-
lowing characters can be used: a-z A-Z 0-9 - . @ _
Port number
Specify the port number of the Device Manager server to which the Device Manager agent is
connected. A number from 0 to 65535 can be specified as the port number.
User ID and password
Specify the user ID and password for the Device Manager agent that is registered on the Device
Manager server. The user ID of the built-in account for the Device Manager agent is HaUser,
and the default password is haset. If you want to change the account used for the Device
Manager agent, you must first register the new user ID in the PeerGroup. For details about how
to configure a user group, see the HP P9000 Command View Advanced Edition Suite Software
Administrator Guide.
4. If the OS you are using is windows-based, restart the Device Manager Agent.
Troubleshooting124