HP P9000 Replication Manager Software 7.3.1-00 Configuration Guide
NOTE:
When using IPv6, both IPv4 and IPv6 must be enabled on the management server. You can use IPv6
addresses only if they are global addresses.
Table 7 Windows OS and programs for a management server
Prerequisite pro-
grams
Windows operating system
Device Manager
server
Windows Server 2003 R2 SP2
• Runs as a guest OS of Windows Server 2008 Hyper-V and V2
• Supports IPv4 and IPv6 connections
• Also runs under VMware ESX/ESXi Server 4.x, and VMware ESXi Server 5.x. To
execute the Hitachi Replication Manager Software on the virtual server, configure
the virtual server using the recommended configuration aswritten in the manual.
Windows Server 2003 R2 64-bit Edition SP2
• Runs in the 32-bit emulation mode
• Also runs as a guest OS of Windows Server 2008 Hyper-V and V2
• Supports IPv4 and IPv6 connections
• Also runs under VMware ESX/ESXi Server 4.x, and VMware ESXi Server 5.x. To
execute the Hitachi Replication Manager Software on the virtual server, configure
the virtual server using the recommended configuration aswritten in the manual.
Windows XP SP2, SP3
• 32-bit architecture only
• Supports IPv4 and IPv6 connections
• Also runs under VMware ESX/ESXi Server 4.x, and VMware ESXi Server 5.x. To
execute the Hitachi Replication Manager Software on the virtual server, configure
the virtual server using the recommended configuration aswritten in the manual.
Windows Vista no SP, SP1, SP2
• 32-bit architecture only
• Supports IPv4 and IPv6 connections
• Also runs under VMware ESX/ESXi Server 4.x, and VMware ESXi Server 5.x. To
execute the Hitachi Replication Manager Software on the virtual server, configure
the virtual server using the recommended configuration aswritten in the manual.
Windows Server 2008 no SP or SP1
• Supports IPv4 and IPv6 connections
• Also runs as a guest OS of Windows Server 2008 Hyper-V and V2.
• Also runs under VMware ESX/ESXi Server 4.x, and VMware ESXi Server 5.x. To
execute the Hitachi Replication Manager Software on the virtual server, configure
the virtual server using the recommended configuration aswritten in the manual.
• Operation on Server Core is not supported
Replication Manager system configurations and requirements30