HP P9000 Replication Manager Software 7.3.1-00 Configuration Guide

NOTE:
Replication Manager supports Mozilla provided by Hewlett-Packard Development Company, L.P.
Required memory for management clients
The minimum required memory size for a management client for all operating systems is at least 512
MB.
System requirements for hosts and pair management servers
This section describes the requirements for hosts and pair management servers.
Requirements for open systems
The following table shows the requirements for hosts and pair management servers. For information
on restrictions, see “Restrictions when Replication Manager and Device Manager versions
differ” on page 135.
Table 16 Requirements for hosts and pair management servers (for open systems)
Prerequisite programsOperating systemType
Device Manager Agent. For information on
agent compatibility with hosts managed by
Device Manager, see the HP P9000 Com-
mand View Advanced Edition Suite Software
Administrator Guide.
The Device Manager Agent must
support the OS.
For information about supported
operating systems for the host or pair
management server, see the HP
P9000 Command View Advanced
Edition Suite Software Administrator
Guide.
Host
• P9000 RAID Manager
• Device Manager Agent 6.0 or later
Pair management serv-
er
P9000 RAID Manager version requirement
If the version of Device Manager Agent used with Replication Manager is 6.4.0 or later, HP strongly
recommends that the version of P9000 RAID Manager running on the same host as the agent be
01.17.03 or later for Windows or 01-21-03/05 for Linux. If an earlier version of P9000 RAID
Manager is used, an error will occur that requires a property file setting described below.
When a host running Device Manager Agent and P9000 RAID Manager is restarted, device information
is updated. This update can render the configuration definition file used to identify command devices
obsolete (because values referring to pre-update device information remain unchanged). This might
make it impossible to gather pair, pool and journal information from Replication Manager.
To prevent this error, specify the following Device Manager Agent property in the server.properties
file:
server.agent.rm.optimization.userHorcmFile=true
Configuration Guide 39