HP P9000 Replication Manager Software 7.3.1-00 Configuration Guide

6. Install Device Manager Agents on the hosts.
For details, see the HP P9000 Command View Advanced Edition Suite Software Administrator
Guide.
NOTE:
If there are resources on hosts where Device Manager Agent is not installed, manually add
the resource (host).
7. If there is any host on which Device Manager Agent has not been installed, manually add the
resource (host) to Device Manager.
For details about how to add hosts in Device Manager, see HP P9000 Command View Advanced
Edition Suite Software Help or HP P9000 Command View Advanced Edition Suite Software CLI
Reference Guide.
8. Ensure that all of the conditions below are satisfied:
• The requirements (microcode and system configuration) for Business Copy or Continuous
Access or other required storage system volume replication functions must be satisfied. For
details about the requirements and the configuration procedures, see the storage system
documentation for the applicable storage system model.
• The storage systems to which the primary and secondary volumes belong are registered as
management targets of Device Manager, and the applicable Device Manager server is re-
gistered as a Replication Manager information source.
• The pair management server recognizes the command device in the target storage system.
• The primary and secondary volumes are recognized individually from the hosts.
• The serial numbers for all storage systems managed by Device Manager are unique.
Mainframe systems environment
To configure Replication Manager for a mainframe environment:
1. Install HP P9000 Command View Advanced Edition Suite on the management servers.
For details, see the HP P9000 Command View Advanced Edition Suite Software Installation and
Configuration Guide. If necessary, also see the following manuals:
• HP P9000 Command View Advanced Edition Suite Software Administrator Guide
• HP P9000 Command View Advanced Edition Suite Software Help
• HP P9000 Command View Advanced Edition Suite Software CLI User Guide
2. Install HP StorageWorks P9000 for Business Continuity Manager Software or P9000 mainframe
agent on the hosts.
NOTE:
Mainframe pair configuration requires HP StorageWorks P9000 for Business Continuity
Manager Software 6.2 or later. Earlier releases only support monitoring functions.
3. After installation of HP StorageWorks P9000 for Business Continuity Manager Software or P9000
mainframe agent, you must specify the information required for linking with Replication Manager.
Setting up Replication Manager50