HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)

If you specify the -script option concurrently with this option, a user script file specified in the
-script option needs to exist on both the local site and remote site.
If you specify the -f option concurrently with this option, the target definition file specified in the -f
option needs to exist on both the local site and remote site.
When this option is specified, the backup server defined in the cascade configuration information file
is used. The following backup servers are ignored:
• A backup server defined in the default VSS definition file (vsscom.conf)
• A backup server defined in the VSS definition file specified in the -vf option
You cannot use this option in extended commands.
Notes
• Make sure no other volume is mounted on the directory of the volume to be backed up in an online
backup.
• The backup information in the backup catalog is managed based on using the copy group as a
key. Depending on the backup method, you might not be able to perform restoration, even though
the backup data exists on the secondary volume.
• When specifying on the command line a file name or directory name containing space characters
for the -target or -f option, you must enclose the file name in double quotation marks (").
Note that enclosing with double quotation marks is not necessary for target path names specified
in batch definition files.
Return Values
0: Normal termination
Any value other than 0: Termination with an error
Examples
• In this example, the command is used to perform an online backup for the entire database on the
specific Exchange Server:
PROMPT> drmexgbackup
KAVX0001-I The drmexgbackup command will now start.
KAVX1600-I Backup processing will now start.
KAVX0040-I The backup ID has been assigned as follows:
backup-ID = 0000000001
KAVX1601-I Backup processing has finished.
KAVX0002-I The drmexgbackup command will now end.
• In this example, the command is used to perform a cold backup for the storage group STR1:
PROMPT> drmexgbackup -target STR1 -mode cold
KAVX0001-I The drmexgbackup command will now start.
KAVX1805-I The information store will now be dismounted.
Storage group name = STR1
KAVX1600-I Backup processing will now start.
KAVX0040-I The backup ID has been assigned as follows:
Backup ID = 0000000001
KAVX1601-I Backup processing has finished.
KAVX1806-I The information store will now be mounted.
CLI Reference Guide 189