HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)

• If you specify an Information Store of data other than backup data obtained by using VSS, an
error will occur.
• If you specify storage-group-name\, an error will occur.
• When you want to specify an Information Store name, check the value displayed in INFORM-
ATIONSTORE of the drmexgcat command and specify exactly the same Information Store
name.
• At restoration, this command dismounts all Information Stores within the storage group to which
the specified Information Store belongs.
• If the restoration target drive contains Information Store files that are not restoration targets,
an error will occur.
• If the restoration target drive contains data from different storage groups, an error will occur.
• If ONLINE is set in CLU_MSCS_RESTORE in the Application Agent configuration definition file
(init.conf), restoration while the cluster resources are online can be performed.
Return Values
0: Normal termination
Any value other than 0: Termination with an error
Conditions Causing an Error
This extended command fails in the following cases:
• An invalid option is specified.
• The system could not acquire information from the operation definition file linked to the operation
ID.
• A specified Application Agent command option cannot be specified as an extended command
option.
• The system failed to record a backup ID in the backup ID record file.
• A command executed inside the extended command encounters an error.
• The command fails to obtain the name of the dictionary map files storage directory.
Examples
• In this example, the extended command is used to restore data from the secondary volume to the
primary volume by resynchronizing the volumes, based on the settings specified in the operation
definition file operation01:
EX_DRM_EXG_RESTORE operation01 -resync
• In this example, the extended command is used to restore Information Store IS12 of storage group
SG1, based on the settings specified in the operation definition file operation01:
EX_DRM_EXG_RESTORE operation01 -resync -recovery -target SG1\IS12
CLI Reference Guide 75