HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)

map files are created using the drmfsbackup command. In such a case, the processing time required
to create the dictionary map files are added to the time required to execute the backup command.
Arguments
mount-point-directory-name
Specify the mount point directory for the file system you want to back up. You must specify the drive
letter for a mounted file system or the absolute path beginning with the drive letter.
You must specify the drive letter for a mounted file system or the absolute path from the drive letter.
Specify the drive letter of the name of the mount point directory to which the secondary volume is to
be mounted or specify the absolute path from the drive letter.
The mount point directory name must satisfy the following:
• Maximum number of characters: The specifiable path length depends on the limitation defined by
the RAID Manager mount or unmount function.
This limitation applies to the length of the path to which the volume to be subject to cold backup
operations has been mounted.
• Characters: Characters that can be used for directory names in Windows (you cannot use a space
character)
If a path does not end with \, the command assumes \ at the end of the path. For example, D: and
D:\ are assumed to be the same drive. D:\MOUNTDIR and D:\MOUNTDIR\ are assumed to be the
same directory.
mount-point-directory-target-definition-file-name
Specify the name of the definition file that specifies the mount point directories for the file systems you
want to back up. To specify this file, you must specify the file name alone. The following shows where
the target definition file for mount point directories is stored and gives examples of specifying the file.
The location of the file
Application-Agent-installation-directory\DRM\conf\fs
Example of specifying the file
D:
E:
F:\MNT
-mode online
Specify this option to perform an online backup. This will perform a backup without unmounting the
file system.
If you specify an online backup for a file system other than VxFS, only resynchronization processing
for the file system will be performed, before the online backup. If applications using the file system
are not prevented from updating data, the validity of the backed-up data cannot be guaranteed.
If you omit this option, online backup is assumed.
-mode vss
Specify this option to perform a VSS backup.
To use this option, the Protection Manager service must be running on the backup server.
-rc name-identifying-the-generation
CLI Reference Guide 85