HP StorageWorks P9000 Command View Advanced Edition Suite Software 7.0 Mainframe Agent Installation and Configuration Guide (TB581-96014, November 2010)

Specify this option to switch the settings to be used for each VSS backup. You can use this option
only when using VSS for backup. For VSS-definition-file-name, specify a file name only. Do not specify
the folder name. The VSS definition file specified in this option must be stored in the following folder:
Application-Agent-installation-directory\DRM\conf\vss
If you omit this option, the command uses the following file as the VSS definition file:
Application-Agent-installation-directory\DRM\conf\vsscom.conf
-script user-script-file-name
Specify this option to execute a user script. Use an absolute path name to specify user-script-file-name.
The conditions for specifying user-script-file-name are as follows:
• Maximum number of bytes: 255
• Available characters: Characters that can be used in a file name in Windows. If the name contains
one or more space characters, the entire name string must be enclosed in double quotation marks
(").
If you specified LOCATION=REMOTE in the user script file, you must also specify the -s option.
-s backup-server-name
Specify this option to connect to a remote backup server to perform a backup. Specify the host name
or the IP address of the backup server by using a character string that is no more than 255 bytes.
You can specify the IP address in IPv4 or IPv6 format.
If you specify the backup server name in the -s option, the backup server names specified in the VSS
definition file (vsscom.conf) and the VSS definition file specified in the -vf option will become
invalid, and the backup server name specified in the -s option will be used.
-auto_import
Specify this option to automatically transfer a backup catalog to a backup server after completing a
volume backup. This option must be specified concurrently with the -s option.
-auto_mount mount-point-directory-name
Specify this option to automatically mount a secondary volume on a backup server after completing
a volume backup. This option must be specified concurrently with the -s and -auto_import options.
Specify mount-point-directory-name by using no more than 64 bytes of characters.
If you omit mount-point-directory-name, a mount destination for a secondary volume is automatically
specified. Apply the same rule as when a mount point is not explicitly specified in the drmmount
command.
To unmount the mounted secondary volume, use the drmumount command.
-svol_check
CLI Reference Guide 87