HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

DescriptionItem
The target migration group name of a volume whose unlocking has been completed
moveToMigration-
GroupName
Event notification address
notifyToURL
The description of the task
description
Legend:
[ ]: Indicates output only when either the -d or the --detail option is specified.
The output items described in Table 65 and Table 66 below are output only if the -d or --detail
option is specified.
Table 65 Items output by the GetTasks command (unlocking task) (ErrorInfo instance)
DescriptionItem
Error message
message
Table 66 Items output by the GetTasks command (unlocking task) (UnlockingInfo instance)
DescriptionItem
Controller logical device number of the volume.
The number is displayed as a value that is a combination of hexadecimal values
and colons (:).
controllerDevi-
ceNumber
The serial number of the storage system that stores the actual volume data
subsystemSerialNum-
ber
The display name for the model of the storage system that stores the actual volume
data. If the displayed model name is unknown, the product name will be displayed.
subsystemDisplay-
Model
The name of the storage system that stores the actual volume data. If the storage
system name is unknown, the product name and serial number will be displayed.
subsystemName
The LDEV number of the LU in the storage system that stores the actual volume data.
The number is displayed as a decimal number or a value that is a combination of
hexadecimal values and colons (:).
subsystemDeviceNum-
ber
The logical device ID of the LU in the storage system that stores the actual volume
data.
For the HP storage system, - is displayed.
subsystemDeviceID
The unlock status for each volume
For details on the values displayed, see “Task statuses” on page 177.
status
The elapsed time from the start of the task execution for each volume.
This value is displayed in hhhh:mm:ss format.
If the elapsed time is 10,000 hours or more, 9999:59:59 is displayed. If the
elapsed time cannot be acquired, n/a is displayed. If the task is not executed,
nothing is displayed.
timeElapsed
CLI Reference Guide 131