HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

DetailsParameter
Specify a filter condition.
For details on the specifiable properties, see Table 5 and Table 8.
If this is omitted, no filter condition is used to narrow down the search.
[filtercondition]
Legend:
[ ]: Specifying this parameter is optional.
Output items
Table 87 Items output by the GetVolumes command (StorageDomain instance)
DescriptionItem
The name of the storage domain
name
Table 88 Items output by the GetVolumes command (LogicalUnit instance)
DescriptionItem
The controller LDEV number. For a LUSE volume, this is an LDEV number of a
representative LDEV.
The number is displayed as a value that is a combination of hexadecimal values
and colons (:).
controllerDevi-
ceNumber
Label specified for a representative LDEV.
If no label is specified for the LDEV, nothing is displayed.
label
The serial number of the storage system that stores the actual data.
[subsystemSerialNum-
ber]
The display name for the model of the storage system that stores the actual data.
If the display model name is unknown, the product name is displayed.
[subsystemDisplay-
Model]
The name of the storage system that stores the actual data.
If the storage system name is unknown, the product name and serial number are
displayed.
[subsystemName]
The vendor name of the storage system that stores the actual data.
subsystemVendor
The name of the migration group to which the volume belongs
migrationGroupName
The emulation type
emulationType
The CVS volume attribute of the volume.
This can be either Yes or No.
[CVS]
The capacity of the volume (units: KB).
If the volume type is normal or pool, the physical capacity is displayed. If the
volume type is virtual, the virtual capacity is displayed.
capacityInKB
Details of CLI commands162