HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

DescriptionItem
The used capacity of the volume (units: KB).
If the volume type is normal, the capacity of the normal volume is displayed. If the
volume type is virtual, the used capacity of the virtual volume is displayed. If the
volume type is pool, nothing is displayed.
consumedCapa-
cityInKB
The ratio (percentage) of consumedCapacityInKB to capacityInKB. If the
volume type is pool, nothing is displayed.
consumedCapacity-
Percentage
The RAID level
RAIDLevel
The drive type
diskType
Drive speed (rpm)
- is displayed if SSD is specified for DiskType.
[diskRPM]
Indicates whether the parity group is encrypted. This can be any of the following:
• Enabled: The parity group is encrypted.
• Disabled: The parity group is not encrypted.
• -: Indicates a THP volume, V-VOL, or LUSE volume. Alternatively, the encryption
feature is not supported.
[encryption]
The drive capacity (units: GB)
[diskCapacityInGB]
The parity group number of the LU in the storage system that stores the actual data.
[arrayGroupNumber]
The parity group name of the LU in the domain controller
controllerArray-
GroupName
The parity group name of the LU in the storage system that stores the actual data.
arrayGroupName
The parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupBusyRate
The maximum parity group usage rate (%). Up to 2 decimal places are displayed.
arrayGroupMaxBusyR-
ate
The program product volume type.
Only the names of the program products that must be displayed as LU attributes
are displayed.
[program-product-name]
(such as Continuous
AccessSynchronous,
Continuous
AccessAsynchronous,
Continuous
AccessJournal,
xpSnapshot)
The volume type. This can be any of the following:
• -: Normal volumes
• THP-VOL: THP volumes
• THP-Pool-VOL: THP pool volumes
xpThinProvisioning
CLI Reference Guide 163