HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

The output items shown below are output only if the -d or --detail option is specified. When
multiple LDEV information items exist, the items are output successively.
Table 89 Items output by the GetVolumes command (LDEV instance)
DescriptionItem
The controller LDEV number.
The number is displayed as a value that is a combination of hexadecimal values
and colons (:).
controllerDevi-
ceNumber
The serial number of the domain controller
controllerSerial-
Number
The model name displayed on the domain controller
controllerDisplay-
Model
The name of the domain controller
controllerName
The emulation type
emulationType
The CVS volume attribute of the volume.
This can be either Yes or No.
CVS
The capacity of the LDEV (units: KB).
If the volume type is normal or pool, the physical capacity is displayed. If the
volume type is virtual, the virtual capacity is displayed.
capacityInKB
The used capacity of the volume (units: KB).
If the volume type is normal, the capacity of the normal volume is displayed. If the
volume type is virtual, the used capacity of the virtual volume is displayed. If the
volume type is pool, nothing is displayed.
consumedCapa-
cityInKB
The ratio (percentage) of consumedCapacityInKB to capacityInKB. If the
volume type is pool, nothing is displayed.
consumedCapacity-
Percentage
Number of cylinders
cylinders
The volume capacity in blocks
LBA
The SLPR number
SLPRNumber
The CLPR number
CLPRNumber
The RAID level
RAIDLevel
The drive type
diskType
Drive model name
diskModelName
Drive speed (rpm)
- is displayed if SSD is specified for DiskType.
diskRPM
CLI Reference Guide 165