HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

Output items
Table 91 Items output by the GetPools command (StorageDomain instance)
DescriptionItem
The name of the storage domain
name
Table 92 Items output by the GetPools command (Pool instance)
DescriptionItem
The pool number
poolId
The status of the pool. This can be any of the following:
• Normal: The pool threshold has not been reached.
• OverThreshold: (Warning) The pool threshold (threshold1 or
threshold2) has been exceeded.
• Blocked: The pool is full or an error has occurred.
status
The total number of THP volumes.
The output item name varies depending on the storage vendor and series.
numberOfThpVolumes
The total capacity of the pool (units: KB)
capacityInKB
The unused capacity of the pool (units: KB)
freeCapacityInKB
The usage rate (%)
usageRate
The threshold1 of the pool (units: %)
threshold1
The threshold2 of the pool (units: %)
threshold2
The over-provisioning percent (%)
The over-provisioning percent indicates the ratio to the total THP volume capacity
allocated to the THP pool and the THP pool capacity.
If the over-provisioning percent is unknown, Unknown will be displayed.
overProvisioning-
Percent
The threshold for the THP pool over-provisioning percent at which a warning is
issued (%)
If the threshold has not been set, nothing will be displayed.
overProvisioning-
Warning
The upper limit for the THP pool over-provisioning percent (%)
If the threshold has not been set, nothing will be displayed.
overProvi-
sioningLimit
The CLPR number
CLPRNumber
Example and execution results
• Command execution example:
In this example, information is obtained about pools within the storage domain MegaT-
echXP12000-Primary.
Details of CLI commands172