HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

Parameters
Table 93 Parameters of the GetFreeSpaces command
DetailsParameter
Specify the name of the storage system.
Specify the value displayed for the name attribute of the StorageArray object
for GetStorageArray in Device Manager CLI.
If you do not know the storage system name, specify the product name and serial
number.
subsystemname
Specify a filter condition.
For details on the specifiable properties, see Table 7 and Table 10.
If this parameter is omitted, the output information will not be filtered by a filter
condition.
[filtercondition]
Legend:
[ ]: Specifying this parameter is optional.
Output items
Table 94 Items output by the GetFreeSpaces command (Subsystem instance)
DescriptionItem
The storage system name
name
The serial number of the storage system
serialNumber
Table 95 Items output by the GetFreeSpaces command (FreeSpace instance)
DescriptionItem
The name of the parity group to which the unused capacity belongs
arrayGroupName
The unused capacity number
freeSpaceNumber
The amount of unused capacity in the parity group (units: KB)
capacityInKB
The total amount of unused capacity in the parity group (units: KB)
totalFreeCapa-
cityInKB
The emulation type of the parity group to which the unused capacity belongs
emulationType
The RAID level of the parity group to which the unused capacity belongs
RAIDLevel
The vendor name of the storage system to which the unused capacity belongs
subsystemVendor
The drive type of the parity group to which the unused capacity belongs
diskType
The drive speed of the parity group to which the unused capacity belongs
If this value cannot be obtained, nothing is displayed.
diskRPM
Details of CLI commands174