HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

Specifiable characters or valuesOperatorsProperty name
You can specify the following characters:
A to Z
a to z
0 to 9
Hyphen (-)
Underscore (_)
Period (.)
At sign (@)
Space character
Non-ASCII characters
Specify no more than 75 bytes.
=, <>
PVolMigrationGroup
#1
An integer from 0 to 2
=, <>
PVolMUNumber
#1
For GetStorageArray
(subtarget=LogicalUnit) in Device
Manager CLI, specify the value displayed for the
raidType attribute of the LogicalUnit object.
Specify this in the format of RAIDx, or
RAIDx(yD+zP).
RAIDx: RAID level
yD: Number of data drives
zP: Number of parity drives
Specify no more than 75 bytes.
=, <>RAIDLevel
An integer from 0 to 31
=, <>SLPRNumber
For GetStorageArray in Device Manager CLI,
specify the value displayed for the
displayArrayType attribute (and not the
arrayType attribute) of the StorageArray
object.
Example: XP1024
If you do not know the displayed model name,
specify the product name.
Specify no more than 384 bytes.
=, <>SubsystemDisplayModel
For GetStorageArray in Device Manager CLI,
specify the value displayed for the arrayType
attribute of the StorageArray object.
If you do not know the model name, specify the
product name.
Specify no more than 384 bytes.
=, <>
SubsystemModel
#4
For GetStorageArray in Device Manager CLI,
specify the value displayed for the name attribute
of the StorageArray object.
If you do not know the storage system name,
specify the product name and serial number.
Specify no more than 384 bytes.
=, <>SubsystemName
CLI Reference Guide 49