HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

Specifiable characters or valuesOperatorsProperty name
For GetStorageArray in Device Manager CLI,
specify the value displayed for the
serialNumber attribute of the StorageArray
object.
Specify no more than 150 bytes.
=, <>,
startsWith,
contains
SubsystemSerialNumber
For GetStorageArray in Device Manager CLI,
specify the value displayed for the vendor
attribute of the VolumeConnection object.
Specify no more than 150 bytes.
=, <>SubsystemVendor
Specify no more than 25 bytes.
=, <>,
startsWith,
contains
SysplexidDevn
#1
Specify no more than 75 bytes.
=, <>,
startsWith,
contains
VOLSER
#1
Locked
Unlocked
=VolumeLockStatus
Used
Free
=VolumeStatus
Simplex
P-VOL
V-VOL
POOL
=, <>
XPSnapshot
( SnapshotXP )
-
THP-VOL
THP-Pool-VOL
=, <>XPThinProvisioning
Legend:
--: Indicates that there are no restrictions on the number of specifiable characters.
( ): Indicates the character string that is used for XP12000/XP10000/SVS200.
#1
This property cannot be specified for filter condition expressions for storage tiers (the filter-
condition parameter of the CreateStorageTier command, and the newfiltercondition
command of the ModifyStorageTier command).
#2
When possible, capacity values in the output information of CLI commands are expressed in a
higher-order unit than the unit specified by the user. For example, the value 10,240 KB is displayed
as 10MB.
#3
For the drive capacity, a value in KB is obtained from Device Manager. However, in Tiered
Storage Manager software, the gigabyte-conversion of those values is used. This conversion in-
Filter conditions that can be used in the CLI50