HP StorageWorks P9000 Tiered Storage Manager Software 7.1.1 CLI Reference Guide (TB585-96014, September 2011)

DescriptionItem
A description of the migration group
description
Table 37 Items output by the AddVolumeToMigrationGroup command (Volume instance)
DescriptionItem
The controller LDEV number
The number is displayed as a value that is a combination of hexadecimal values
and colons (:).
controllerDevi-
ceNumber
The emulation type
emulationType
The CVS volume attribute of the volume
This can be either Yes or No.
CVS
The capacity of the volume (units: KB)
capacityInKB
The RAID level
RAIDLevel
The drive type
diskType
The parity group name of the LU in the domain controller
controllerArray-
GroupName
The parity group name of the LU in the storage system that stores the actual data
arrayGroupName
Indicates whether the volume is being used.
This can be either Used (you cannot specify the volume as the migration destination)
or Free (you can specify the volume as the migration destination).
volumeStatus
Indicates whether the volume is locked.
This can be either Locked (you cannot specify the volume as the migration
destination) or Unlocked (you can specify the volume as the migration destination).
volumeLockStatus
The host name
If multiple host names exist, they are separated by commas (,).
hostNames
NOTE:
Unknown is output for some output items when volume information in the storage domain cannot be
obtained either because the volume in the storage system has been deleted using Device Manager,
or because information regarding the externally connected storage cannot be obtained.
Example and execution results
• Command execution example:
In this example, a volume is added to the migration group MG011 in the storage domain MegaT-
echXP12000-Primary. The controller LDEV number for the added volume in the domain con-
troller is set as 3:A6.
CLI Reference Guide 89