HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
devnums
Obtain this value from the execution result of the GetStorageArray (subtarget=LDEV)
command. Execute this command by specifying only the model and serialnum parameters,
and LDEV for the subtarget parameter. In the execution result of this command, the devNum
value of an LDEV appears under An instance of LDEV. For the devnums parameter, specify
the devNum value of the LDEV from which you want to delete a label.
Command execution example
hdvmcli DeleteLabel -o "D:\logs\DeleteLabel.log"
"serialnum=10037" "model=XP24000" "devnums=00:00:00,00:00:01"
Command execution result
RESPONSE:
(Command completed; empty list returned)
DeleteLogicalUnit
DeleteLogicalUnit deletes the LU and corresponding LDEV from the storage device. With P9500,
XP24000/XP20000, and XP12000/XP10000/SVS200, you can delete multiple logical units at
once.
NOTE:
• For P9500 or XP24000/XP20000, logical units cannot be deleted for parity groups with chassis
numbers from 65 to 96, or from 16485 to 16516. Parity groups with chassis numbers from 65
to 96, or from 16485 to 16516 are indicated as V-VOLs.
• For XP12000/XP10000/SVS200, logical units cannot be deleted for parity groups with chassis
numbers from 65 to 96. Parity groups with chassis numbers from 65 to 96 are indicated as V-
VOLs.
Parameters
Table 36 DeleteLogicalUnit command parameters
DescriptionStatusParameter name
Serial number of the storage system of the LURequired
serialnum
Model of the storage system of the LURequired
model
Command reference112