HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

Parameters
Table 39 DeleteStorageArray command parameters
DescriptionStatusParameter name
Serial number of the storage system to delete
You cannot specify this parameter if you are deleting an SMI-S
enabled storage system.
Optional
#
serialnum
Model of the storage system to delete
You cannot specify this parameter if you are deleting an SMI-S
enabled storage system.
Optional
#
model
Object ID of the SMI-S enabled storage system to delete
Specify the object ID obtained from another CLI response. The
value is encoded by the CLI.
Optional
#
saobjid
#
Always specify either the serialnum and model parameters together, or the saobjid para-
meter by itself. Do not specify saobjid together with serialnum and model. Doing so results
in an error.
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
saobjid
Obtain this value from the execution result of the GetStorageArray command. Set the value
of objectID, obtained from the execution result, into the saobjid parameter.
Command execution example
hdvmcli DeleteStorageArray -o "D:\logs\DeleteStorageArray.log"
"serialnum=10001" "model=XP1024"
Command execution result
RESPONSE:
(Command completed; no data returned)
DeleteVirtualVolume
DeleteVirtualVolume deletes a THP/Smart volume.
CLI Reference Guide 117