HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

Command execution result
An instance of ArrayReservation
objectID=*****
target=*****
serialNumber=14009
arrayType=XP12000
loginID=dmuser
beginTime=1,039,003,476
*****: The values are encoded by the CLI.
GetPoolShrinkStatus
The GetPoolShrinkStatus command obtains the execution status of the THP/Smart-pool shrinking
operation that was executed by the ShrinkPool command.
If you execute this command, the information of the THP/Smart pool volumes that belong to the
THP/Smart pool is displayed.
After the operation for shrinking the THP/Smart pool finishes, the excluded THP/Smart pool volumes
change to normal volumes and do not appear in the execution result of this command.
When all of the THP/Smart pool volumes change to normal volumes that belong to the THP/Smart
pool specified by the ShrinkPool command (when no corresponding LogicalUnit instances are
displayed), use the FormatLU command to format the volumes.
NOTE:
• This command can be used only with P9500.
• While the THP/Smart-pool shrinking operation is being executed, if another operation is performed
on the pool and the pool changes to a status in which the pool cannot shrink, the THP/Smart-pool
shrinking operation fails. As a result, the THP/Smart pool volumes to be excluded might partially
remain as they are, without being excluded. In this case, do not execute the FormatLU command
for these volumes.
• The storage system is locked while this command is being executed. For this reason, do not execute
this command repeatedly.
Parameters
Table 43 GetPoolShrinkStatus command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Pool IDRequired
poolid
Parameter values to obtain in advance
None.
CLI Reference Guide 127