HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

Value to be specified for the subinfo parameter and acquir-
able information
Specifiable
subinfo parameter
Value of the para-
meter subtarget
ReplicationInfo: Information about Fast Snap copy pairs
that belong to a snapshot group
snapshot-
grpsubinfo
SnapshotGroup
The following information about resource groups used for data
migration using virtual IDs can be acquired:
• VHostStorageDomain: Virtual information about host stor-
age domains
• VLDEV: Virtual information about LDEVs
• VPort: Virtual information about ports
vrpusubinfo
VResourceParti-
tionUnit
The following table shows examples of specifying the parameter subtarget and the subinfo
parameters.
Table 46 Examples of using the GetStorageArray command
Command specificationInformation to acquire
GetStorageArray subtarget=LDEV
LDEV information
GetStorageArray
subtarget=LogicalUnit
lusubinfo=Path
Information about paths for logical units
GetStorageArray subtarget=LDEV
ldevsubinfo=VolumeConnection
Mapping information of external volumes for LDEVs
GetStorageArray
subtarget=ArrayGroup
arraygroupsubinfo=LogicalUnit
lusubinfo=LDEV,Path
Information about logical units for parity groups and about
LDEVs and paths for those logical units
GetStorageArray subtarget=Path
pathsubinfo=WWN,HostInfo
Information about paths and WWNs for those paths
GetStorageArray subtarget=Pool
poolsubinfo=LogicalUnit
Information about pools and logical units for those pools
For details about parameters other than the parameter subtarget and the subinfo parameters, see
“GetStorageArray (subtarget not specified) ” on page 136 to “GetStorageArray
(subtarget=VResourcePartitionUnit)” on page 199.
GetStorageArray (subtarget not specified)
By executing GetStorageArray without specifying the subtarget parameter, you can obtain
basic information about all the storage systems (including SMI-S enabled storage systems) that are
registered on the Device Manager server.
Format
When obtaining information about all storage systems:
Command reference136