HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

List of 1 TieringPolicy elements:
An instance of TieringPolicy
objectID=*****
policyID=10
allocationThresholdT1Max=50
allocationThresholdT1Min=20
allocationThresholdT3Max=40
allocationThresholdT3Min=10
numberOfVVols=4
*****: The values are encoded by the CLI.
GetStorageArray (subtarget=VResourcePartitionUnit)
The GetStorageArray (subtarget=VResourcePartitionUnit) command obtains information
about resource groups used for data migration using virtual IDs. The resource groups used for data
migration using virtual IDs are managed by a storage system management tool.
NOTE:
The command can obtain information only when you are using P9500 with a microcode version of
70-03-30-XX/XX or later.
Parameters
Table 67 GetStorageArray (subtarget=VResourcePartitionUnit) command parameters
DescriptionStatusParameter name
Specify VResourcePartitionUnit.
Required
subtarget
Serial number of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
serialnum
Model of the storage system
If you omit this parameter, all the storage systems become the
target.
Optional
model
ID of a resource group used for data migrations that use virtual
IDs
Specify this parameter when you want to obtain information about
a specific resource group. If you specify this parameter, you must
also specify the model and serialnum parameters.
Optional
vrpuid
Family of the virtual storage system
Specify this parameter when you want to obtain information about
a specific virtual storage system.
Optional
vfamily
Serial number of the virtual storage system
Specify this parameter when you want to obtain information about
a specific virtual storage system.
Optional
vserialnum
CLI Reference Guide 199