HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

lastRefreshed=1,277,966,802
autoFormatLU=0
statusOfDBInconsistency=0
configUpdateStatus=1
openAllocatedActualCapacity=2,990,258,073
openUnallocatedCapacity=3,528,243,650
openUnallocatedActualCapacity=3,528,243,650
openReservedCapacity=2,098,560
openReservedActualCapacity=2,098,560
numberOfReservedLUs=2
numberOfOpenReservedLUs=2
numberOfImReservedLUs=0
distributedMode=-1
*****: The value is encoded by the CLI.
ModifyTieringPolicy
The ModifyTieringPolicy command modifies the tiering policy.
NOTE:
You can use this command only when you are using P9500 with a microcode version of
70-05-00-XX/XX or later.
Format
hdvmcli [URL] ModifyTieringPolicy [options]
model=model serialnum=serial-number policyid=Tiering-policy-ID
[allocationthresholdt1max=maximum-allocation-threshold-value-for-tier-1]
[allocationthresholdt1min=minimum-allocation-threshold-value-for-tier-1]
[allocationthresholdt3max=maximum-allocation-threshold-value-for-tier-3]
[allocationthresholdt3min=minimum-allocation-threshold-value-for-tier-3]
Parameters
Table 78 ModifyTieringPolicy command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Tiering policy ID
Specify the tiering policy ID to be modified.
You can specify from 6 to 31.
You cannot specify a tiering policy ID from 0 to 5.
Required
policyid
CLI Reference Guide 237