HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

• Changes the maximum allocation threshold for Tier 3 to 40 (allocationthresholdt3max:
40)
• Changes the minimum allocation threshold for Tier 3 to 10 (allocationthresholdt3min: 10)
hdvmcli ModifyTieringPolicy -o "D:\logs\ModifyTieringPolicy.log"
model=P9500 serialnum=53039 policyid=10
allocationthresholdt1max=50 allocationthresholdt1min=20
allocationthresholdt3max=40 allocationthresholdt3min=10
Command execution result
RESPONSE:
An instance of StorageArray
.
.(Attributes of StorageArray are omitted here)
.
List of 1 TieringPolicy elements:
An instance of TieringPolicy
objectID=*****
policyID=10
allocationThresholdT1Max=50
allocationThresholdT1Min=20
allocationThresholdT3Max=40
allocationThresholdT3Min=10
numberOfVVols=4
*****: The value is encoded by the CLI.
ModifyVirtualVolume
The ModifyVirtualVolume command changes the settings related to a THP/Smart volume.
For P9500
• This command expands a THP/Smart volume.
• This command applies the tiering policy to the Smart volume (the microcode version must be 70-
02-50-00/00 or later).
• This command enables or disables hardware tier relocation for a Smart volume.
• This command changes the CLPR number of a THP/Smart volume where a path is not assigned.
For XP24000/XP20000
• This command assigns a THP volume to a THP pool.
• This command releases a THP volume from a THP pool.
• This command changes the usage threshold for THP volumes.
NOTE:
This command can be used only with P9500 and XP24000/XP20000.
For XP24000/XP20000, the following conditions must be satisfied when specifying a THP volume:
CLI Reference Guide 239