HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

DescriptionStatusParameter name
Device number of the S-VOL
For P9500 and XP24000/XP20000:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format ww:xx:yy, where
ww is the LDKC number, xx is the CU number, and yy is the
LDEV number. ww is optional. If ww is omitted, LDKC is as-
sumed to be 0.
For XP12000/XP10000/SVS200:
Specify this parameter as a decimal number or colon-delim-
ited hexadecimal number in the format xx:yy, where xx is
the CU number, and yy is the LDEV number.
The execution results are output in decimal.
Required
svoldevnum
Port number in the HORCM configuration file that manages the
S-VOL path
If you specify this parameter, specify either svolportid or
svolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error occurs.
Optional
svolportid
Port name in the HORCM configuration file that manages the
S-VOL path
If you specify this parameter, specify either svolportid or
svolportname. Do not specify both parameters at the same
time. If they are specified at the same time, an error occurs.
Optional
svolportname
Pool ID of the pool in which the differential data and journal data
for the S-VOL is to be stored.
For Continuous Access Asynchronous Software:
You must specify this parameter.
For Continuous Access Journal Software:
You must specify this parameter when you are using method
2 or 3.
For other cases, this parameter value is invalid even if you specify
a value.
Optional
svolpoolid
Type of operation that is to be executed with the copy pair
You can specify the following values:
• BusinessCopy: Business Copy Software
• ContinuousAccessSync: Continuous Access Synchronous
Software
• ContinuousAccessAsync: Continuous Access Asynchron-
ous Software
• Snapshot: Snapshot
• ContinuousAccessJournal: Continuous Access Journal
Software
Required
replication-
function
CLI Reference Guide 331