HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

DescriptionAttribute
Time at which the alert occurred (example: 2008/04/06 20:13:56)timeOfAlert
ArrayGroup instance
Commands for which an ArrayGroup instance is output
• AddExternalArrayGroup, page 51
• AddPool, page 78
• AddVirtualVolume, page 96
• GetStorageArray (subtarget=ArrayGroup) , page 139
• GetStorageArray (subtarget=FreeSpace) , page 150
• GetStorageArray (subtarget=PDEV) , page 176
• GetStorageArray (subtarget=Pool) , page 178
• ModifyPool, page 215
Table 120 ArrayGroup instance attributes
DescriptionAttribute
Object ID of the parity group
objectID
Parity group name
This item is output if it has been registered.
name
Number of the chassis containing the parity group
chassis
Parity group number
number
Display name of the parity group (example: 1, 1-1, 2-1-1, S3-1)
S in the above format indicates the type of the parity group.
• E: Parity group of an External volume
• V: Parity group of V-VOL
• X: Parity group of a THP volume
displayName
RAID type of the parity group
The RAID type is output in the format RAIDx(yD[+zP]) or RAIDx(yD[+yD]).
• RAIDx: RAID level
• yD: Number of data drives
• zP: Number of parity drives
For example, RAID5(3D+1P) indicates a RAID5 configuration consisting of three
data drives and one parity drive.
raidType
Emulation mode
This item is output for the XP24000/XP20000, XP12000/XP10000/SVS200, or
XP1024/XP128 (example: OPEN-8).
emulation
Type of physical drives that make up the parity group (example: DKR2E-J146FC)diskType
Output items372