HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

DescriptionAttribute
Type of the drive
If the storage system is P9500 and a THP pool is used, one of the following values
is output:
• 1: SATA
• 4: SAS
• 5: SSD or FMD
• -1: If any of the following conditions are satisfied
• The drive type is unknown
• Drive drive types are mixed (except for SSD and FMD)
• Drives with different drive speeds are mixed
This information is invalid for other cases (-1 is output).
diskType
Indicates whether the pool is a Smart pool.
• enable: Smart pool
• disable: THP pool
tierControl
Indicates whether the automatic execution of performance monitoring and hardware
tier relocation is enabled.
This attribute is valid only when the storage system is P9500 and a Smart pool is
used.
• enable
• disable
autoMigration
Execution cycle of performance monitoring and hardware tier relocation
• 0: 30 minutes
• 1: 1 hour
• 2: 2 hours
• 4: 4 hours
• 8: 8 hours
• 24: 24 hours
migrationInterval
#1
Start time of performance monitoring (example: 00:00)
This attribute is valid only when migrationInterval is 24.
monitorStartTime
#1
End time of performance monitoring (example: 23:59)
This attribute is enabled only when migrationInterval is 24.
monitorEndTime
#1
Performance monitoring mode
• 0: Periodic
• 1: Continuous
monitoringMode
#1
Indicates whether a THP/Smart pool can be configured by mixing internal and
external volumes.
• enable
• disable
externalMixCompat-
ible
Output items410