HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

DescriptionAttribute
Execution status of performance monitoring
• 0: Stopped
• 1: Executing
monitoringState
#2
Date and time at which performance monitoring started
If the date and time is valid, it is output in YYYY/MM/DD hh:mm:ss format. If it is
invalid, -1 is output.
lastMonitor-
StartDate
#2
Date and time at which performance monitoring ended
If the date and time is valid, it is output in YYYY/MM/DD hh:mm:ss format. If it is
invalid, -1 is output.
lastMonitorEnd-
Date
#2
Execution status of hardware tier relocation
• 0: Stopped
• 1: Executing
relocationState
#2
Progress percentage of hardware tier relocation
relocationPro-
gress
#2
Number of hardware tiers
This attribute is valid only when the storage system is P9500 and a Smart pool is
used.
numberOfTiers
Currently, this information does not apply to storage systems (-1 is output).
thresholdRepDe-
pAlert
Currently, this information does not apply to storage systems (-1 is output).
thresholdRepDataRe-
leased
Currently, this information does not apply to storage systems (-1 is output).
userUsedCapa-
cityInKB
Currently, this information does not apply to storage systems (-1 is output).repDataCapacityInKB
Currently, this information does not apply to storage systems (-1 is output).
repManageCapa-
cityInKB
Currently, this information does not apply to storage systems (-1 is output).numberOfThpVols
Currently, this information does not apply to storage systems (-1 is output).
capacityOfThpVol-
sInKB
#1
This attribute is valid only when a Smart pool is used, and autoMigration is enable.
#2
This attribute is valid only when a Smart pool is used, and autoMigration is disable. This
information is invalid for other cases (-1 is output).
CLI Reference Guide 411