HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

ParameterSpecification conditions
devnum
No restrictions
Table 179 Conditions for specification of parameters for the ModifyVirtualVolume command
NotesParameter
Specification condi-
tions
--
assign
model
serialnum
Condition-1
For the devnums parameter, you can specify multiple
device numbers for a THP/Smart volume. To specify
five or more device numbers, write them separately
on multiple command lines. If you specify five or
more device numbers on one command line and
then perform batch processing, an error might occur
with the error message KAIC90084-E that has the
response value 413 Request Entity Too
Large.
capacity
clprNumber
devnums
poolid
threshold
tieringpolicy
tierrelocation
No restrictions
Examples of batch file creation
The following are examples of batch files created according to the specified format, input rules, and
parameter conditions.
beginbatch
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-A domain=0 devnum=816 lun=100
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-A domain=0 devnum=817 lun=101
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-B domain=0 devnum=816 lun=102
hdvmcli ADDLUN model=XP12000 serialnum=14053 portname=CL1-B domain=0 devnum=817 lun=103
endbatch
Using the batch functionality
The batch functionality uses batch files. When the batch functionality is used, commands that satisfy
the execution conditions are processed together. The command execution results are also output each
time they are processed together.
Operations to complete in advance
• Lock the target storage system.
When the batch functionality is executed, HP recommends using the AddArrayReservation
command to lock the target storage system in advance, and prevent other users from performing
a storage system allocation.
CLI Reference Guide 451