HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

RoleCommand name
Admin, Modify, or View
GetServerInfo
Admin, Modify, or View
GetURLLink
#
All Resources must be assigned as a resource group.
Table 17 Roles required to execute commands (Commands related to replication)
RoleCommand name
Admin or Modify
AddConfigFileForReplication
Admin or Modify
AddReplication
Admin or Modify
DeleteReplication
Admin, Modify, or View
GetReplicationControllerPair
Admin or Modify
ModifyReplication
Notes on executing CLI commands
The following table provides notes on executing the Device Manager CLI commands and on adding
LUNs or host storage domains. It also provides a note about the characters that can be used for host
names and storage system names.
Table 18 Notes on executing commands
DescriptionItem
When adding a LUN or host storage domain, make sure that I/O
operations from the host to the corresponding port have stopped.
If you add a LUN or host storage domain, the LUN security for the
corresponding port takes effect automatically. Because of this, when the
command is executed, if I/O operations are taking place from the host
to the port being added, then the I/O operations might terminate with
an error.
Related commands
• AddLun
• AddHostStorageDomain
• AddWWNForHostStorageDomain
Adding a LUN or host storage do-
main
When setting up security for a LUN or host storage domain, make sure
that I/O operations from the host to the LU of the corresponding port
have stopped.
If you set up security for a LUN or host storage domain, the LUN security
for the corresponding port takes effect automatically. Because of this,
when the command is executed, if I/O operations are taking place from
the host to the LU of the corresponding port, then the I/O operations
might terminate with an error.
Related commands
AddWWNForHostStorageDomain
Setting up security for a LUN or
host storage domain
CLI Reference Guide 47