HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

sizeInKB=1,048,576
cylinders=0
fsControlIndex=0
List of 2 ExternalPathInfo elements:
An instance of ExternalPathInfo
objectID=*****
externalWWN=50.06.0E.80.10.22.8B.50
externalLun=1
portID=13
pathGroupID=23
priority=1
An instance of ExternalPathInfo
objectID=*****
externalWWN=50.06.0E.80.10.22.8B.52
externalLun=0
portID=15
pathGroupID=23
priority=2
*****: The values are encoded by the CLI.
AddHostStorageDomain
AddHostStorageDomain adds a host storage domain. This command creates a host group in the
storage system.
NOTE:
When AddHostStorageDomain adds a host storage domain, LUN security for the target port is
automatically enabled. Make sure that the I/Os of the target port are stopped.
Parameters
Table 21 AddHostStorageDomain command parameters
DescriptionStatusParameter name
Serial number of the storage system for the host storage domainRequired
serialnum
Model of the storage system for the host storage domainRequired
model
Port ID of the host storage domain
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error occurs.
Optional
port
The port name for the host storage domain
Specify either port or portname. Do not specify both
parameters at the same time. If they are specified at the same
time, an error occurs.
Optional
portname
Command reference56