HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

XP12000/
XP10000/
SVS200
XP24000/
XP20000
P9500Description
hostmodeoption
values
----Y
Online LUSE expansion
Specify this value when the expansion
of the capacity of a LUSE volume is
notified for a host.
69
----Y
Change the Unit Attention for Blocked
Pool-VOLs
Specify this value when a Unit
Attention (UA) response for a closed
pool volume is changed from NOT
READY to MEDIUM ERROR.
71
----Y
AIX GPFS Support
Specify this value when a General
Parallel File System (GPFS) is used
while connected to an AIX host.
72
----Y
Support Option for WS2012
Specify this value when the Thin
Provisioning functionality is used from
an environment connected to a
Windows Server 2012 host.
When Windows Server 2012 ODX
(Offload Data Transfer) is used,
specify this parameter if the host mode
is set to Windows or Windows
Extension.
73
Legend:
Y: The value can be specified.
--: The value cannot be specified.
Parameter values to obtain in advance
serialnum and model
Obtain these values from the execution result of the GetStorageArray command. In the execution
result, use the arrayType value or the displayArrayType value to specify the model para-
meter, and use the serialNumber value to specify the serialnum parameter.
port and domain
Obtain these values from the execution result of the GetStorageArray (subtarget=Port,
portsubinfo=HostStorageDomain) command. Execute this command by specifying only
the model and serialnum parameters, Port for the subtarget parameter, and HostStor-
ageDomain for the portsubinfo parameters. In the execution result of this command, the
portID value appears in a Port. Use this portID value to specify the port parameter. For
the domain parameter, use a domainID that is not used as one of the host storage domains of
the port you intend to specify.
portname
CLI Reference Guide 65