HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-00 CLI Reference Guide

NOTE:
For details about the following conditions, see the Thin Provisioning documentation:
• The number of pool volumes that can be specified in a THP/Smart pool
• The total maximum number of THP/Smart pools, Snapshot pools, and Fast Snap pools
Format for P9500
hdvmcli [URL] AddPool [options]
model=model serialnum=serial-number [poolid=pool-ID]
[threshold=THP/Smart-pool-threshold-1]
[threshold2=THP/Smart-pool-threshold-2] [threshold2mode={0|1}]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
devnums=device-number-of-logical-unit
[tiercontrol={enable|disable}]
[automigration={enable|disable}] [migrationinterval={0|1|2|4|8|24}]
[monitorstarttime=start-time-of-performance-monitoring]
[monitorendtime=end-time-of-performance-monitoring]
[monitoringmode={0|1}]
[bufspacesfornewpageassignment=buffer-space-for-new-page-assignment]
[bufspacesfortierrelocation=buffer-space-for-hardware-tier-relocation]
Format for XP24000/XP20000
hdvmcli [URL] AddPool [options]
model=model serialnum=serial-number [poolid=pool-ID]
[threshold=THP-pool-threshold-1]
[overprovisioningwarning=over-provisioning-warning-threshold]
[overprovisioninglimit=over-provisioning-limit-threshold]
devnums=device-number-of-logical-unit
Parameters
Table 27 AddPool command parameters
DescriptionStatusParameter name
Serial number of the storage systemRequired
serialnum
Model of the storage systemRequired
model
Pool ID
Specify the pool ID of the THP/Smart pool to be created.
You can specify an integer from 0 to 127.
If this parameter is omitted, it is set automatically.
Do not specify a pool ID that is already being used by
Snapshot, Fast Snap, or Thin Provisioning.
Optional
poolid
Command reference80