HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-02 Release Notes (TB581-96399, March 2014)

Specify the settings as follows:
1. On the host on which Host Data Collector is installed, specify the following settings:
In Windows:
In the hosts file, specify the IP address and host name of the host on which Host Data Collector
is installed. Host Data Collector must be able to use this IP address to communicate with Device
Manager server. Do not specify another IP address for that host.
In UNIX:
In the hosts file, specify the IP address and host name of the host on which Host Data Collector
is installed. Host Data Collector must be able to use this IP address to communicate with Device
Manager server. Do not specify another IP address for that host.
If a DNS server is used for name resolution, the host name must be resolvable to an IP address
that Host Data Collector can use to communicate with Device Manager server.
2. Restart the service Host Data Collector Base Service.
Sorting the list of logical group volumes in the Resources tab
If the Resources tab displays a volume list in a logical group that includes hosts displayed by sorting
the columns described in Target columns, the drawing of the window might not succeed, and the
KAIC16993-E message might be generated.
The KAIC16993-E message might be generated when the total result of multiplying the following
items A and B exceeds 800,000.
A. The number of LUN paths set for one volume allocated to a host that is registered in the logical
groups to be displayed.
B. Within the LUN paths described in item A, the number of LUN paths set for hosts registered in
the logical groups to be displayed.
Target columns
• Host
• WWN/iSCSI Name
• WWN Nickname
• Port
• Port Type
• LUN
• File System
• File System Used %
• Virtual Port
• Virtual Host Group ID
Temporary solution
Reduce the number of hosts registered for the logical group to be displayed.
Important considerations 15