HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-02 Release Notes (TB581-96399, March 2014)

The existing path group was not recommended for External Paths in the Virtualize Volumes dialog box
and the volume virtualization was executed by using a new path group.
Symptom 2 (GUI):
The existing paths between storage systems were not displayed in order of External Path Priority in
the Virtualize Volumes dialog box.
Symptom 3 (GUI, CLI):
The volume virtualization using the existing path group generated the following messages:
• GUI: DevMgr 7.0.0-00 or later: KAIC06450-E
• CLI: HDvM 6.1.0-00 or later: KAIC90083-E (error code: 6450)
Do not change the path group setting using XP P9000 Remote Web Console or XP Remote Web
Console.
Allocating volumes to many hosts
Operations in the Allocate Volumes dialog box cannot continue and the GUI is grayed out if the
following conditions are met:
• Device Manager 7.2.1-02 or later is used.
• The volumes are allocated to 101 or more hosts using the Allocate Volumes dialog box.
When allocating the volume to 101 or more hosts at one time by using the Allocate Volumes dialog
box, allocate the volumes to 100 or fewer hosts at one time. Repeat the allocation as necessary.
User operation during task registration
If a user operation closed the task registration dialog box before it was closed automatically, user
screen operations might become unavailable.
If this occurs, log in again and check the registration task. If necessary, re-register the task.
Manually selecting LU numbers
From the Allocate Volumes dialog, Allocate Like Volumes dialog, or the Add Storage dialog of Plug-in
for Virtualization Server Provisioning, if an LU number was manually selected, and then some other
option was selected, the following issues might occur:
• Volumes were not displayed and an LU number could not be selected when the Select LU Number
dialog was opened by clicking the Select LU Number button.
• The KAIC16993-E error occurred when the Show Plan button is clicked.
If this occurs, close and reopen the dialog, and then manually select an LU number immediately before
clicking the Show Plan button.
Volumes allocated to ports with LUN security disabled
The following notes apply to volumes allocated to ports with LUN security disabled.
• In the Hosts view, volumes allocated to a host do not appear. Confirm the volume information in
the Open-Allocated view.
• Volumes allocated to multiple ports with LUN security disabled cannot be unallocated from specific
ports. Use one of the following tools to unallocate only the volumes that are allocated to specific
ports:
◦ Remote Web Console
◦ Device Manager CLI
Important considerations 31