HP XP P9000 Command View Advanced Edition Suite Software 7.6.1-02 Release Notes (TB581-96399, March 2014)

Updating the display information of Plug-in for Virtualization Server Provisioning
If an operation on the VMware ESX server or on a storage system is performed, the information
provided by Plug-in for Virtualization Server Provisioning might not be updated.
If the display information is not updated, log in to Plug-in for Virtualization Server Provisioning again.
Editing external paths
In Edit External Paths dialog box launched from Virtualization Volumes dialog box, a volume
virtualization task selecting 9 or more external paths can be executed. However, the task generates
the KAIC15001-E error.
When creating external paths in a volume virtualization task, select 8 or fewer external paths
(specification of storage systems).
If this occurs, delete the external paths and execute the volume virtualization task again.
Virtualizing storage devices
If you perform a volume virtualization task created under all of the following conditions in the Virtualize
Volumes dialog box, the task generates a KAIC15001-E error:
• The external paths are set to the volumes that are selected when you launch the Virtualize Volumes
dialog box.
• Both of the ports on the internal storage side and external storage side in the external paths
described in the first condition are selected.
Virtualize a storage device by either of the following methods:
Using the GUI: Perform either of the following operations, and then retry the volume virtualization task.
• Cancel the external path assigned to the external volumes.
• Create a new path by selecting a port other than the ports of the internal storage system, or by
selecting a port other than the ports of the external storage system.
Not using the GUI:
• CLI AddExternalArrayGroup command.
• Element Manager, Remote Web Console, or XP Remote Web Console.
Storage device virtualization tasks
If a storage device virtualization task failed by interception, the volume of an external storage system
may remain being allocated to an internal storage system.
If this occurs, virtualize a storage device with either of the following methods:
Using the GUI:
Perform either of the following operations, and then retry the volume virtualization task.
• Cancel the external path assigned to the external volumes.
• Create a new path by selecting a port other than the ports of the internal storage system, or by
selecting a port other than the ports of the external storage system.
Not using for GUI:
• CLI AddExternalArrayGroup command.
• Element Manager, XP P9000 Remote Web Console, or XP Remote Web Console.
NOTE: If the solution is not performed and a storage device virtualization task specifying the remaining
volumes is executed, the task generates the KAIC15001-E error. If this occurs, perform the solution
above.
Important considerations 43