HP XP P9000 Replication Manager Software 7.6.0-00 User Guide

Setting the copy pair status monitoring conditions for each copy pair

To set the conditions for monitoring copy pair status on a copy pair basis:

1. If you intend to use SNMP traps to send alerts, load the MIB definition files into the software that

will receive the traps.

For the location of the Replication Manager MIB definition files, see “About MIB definition

files” on page 434.

2. Display the information about the volume or copy group that contains the copy pair where you

want to set monitoring conditions.

For details on how to display this information, see the following:

• Viewing information about copy groups belonging to a host, page 307

• Viewing information about volumes belonging to a storage system, page 309

• Viewing information about copy groups belonging to a copy pair configuration defini-

tion, page 305

3. Select the check boxes of the copy pairs for which you want to set monitoring conditions, and

then click Create Alerts.

The Create Alert Setting Wizard starts with the 1. Introduction page displayed.

If you select the Don’t show this message again check box, this page is not displayed in the

future.

4. Read the wizard page, and then click Next.

The 2. Select Monitoring Type page appears.

5. Select the Pair Status Monitoring option, and then click Next.

The 3. Select Alert Setting page appears.

6. Select the Create New Alert Setting option, and then click Next.

The 4. Edit Alert Action page appears.

7. Specify the alert notification conditions and method.

You can also save these settings as a template or use an existing template.

8. Click Next.

The 5. Confirm page appears.

9. Confirm the settings that will be applied and click Confirm.

The 6. Finish page appears.

10. Click Finish.

The settings specified in the wizard are registered in the list of alert settings.

To view this list, from the Explorer menu, choose Alerts and then Alerts.