HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

4. The script checks the location indicated by the JAVA_HOME environment variable to find out if
the java.exe or jre.exe program exists.
NOTE:
If the Java or JRE commands are not found, the script exits.
5. The default installation location is C:\Program Files\Hewlett-Packard\Performance
Advisor\ displayed and you are prompted to enter the CLI (non-default) installation location.
Enter n to continue with the default installation location.
Enter y for non-default installation location, and type the path of the location where you want to
install the CLUI.
NOTE:
A message displays the properties utility. This utility will create and maintain the
wrapper.utilities file.
6. The script provides an option for enabling the IPv6.
Enter n to continue with the default value, which is IPv4.
7. The script prompts you to enter the management station name or IP Address.
• If you want to retain the default value, which is http:\\<localhost>, press Enter and
proceed to the next step. In addition, port 80 will be the default port used to establish com-
munication with the management station.
• If you entered the management station name or IP address, the installation script prompts you
for the following additional values:
a. To confirm if SSL is installed and configured on the management station's web server.
Enter n to continue without SSL.
b. To enter the port number of the management station http port number.
Enter the same port number that P9000 Performance Advisor on the management station
is configured to use.
If you want to use the default port 80, press Enter.
Proceed to the next step.
8. The script prompts for your user name and password.
• If you are a valid user on the local system where P9000 Performance Advisor is installed or
on the domain controller, use your local system or domain login credentials for authentication.
NOTE:
It is mandatory to provide a valid user name and password for all the CLUI commands to
function properly. Valid user account implies one of the following:
• The local system administrator has added your name to the HP Storage Admin or HP
Storage Users group on the system where P9000 Performance Advisor is installed.
• The domain/site administrator has added your name to the group (global group) that is
given administrator privileges or to the group (global group) that is given user-level
privileges.
Installing CLUI12