HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Examples
elun -dkc 10090
elun -dkc 10033 —hr
elun -dkc 1038 —L
elun -dkc 5235 —ms http://16.1.17.192:8080
elun -auth administrator:userpwd
CACHEGRP
Syntax
cachegrp -dkc <serial #> [-clpr <CLPR name>] [-perf] [-st <start time>
-et <end time>] [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>]
[-pf <password file>] [-?]
Supported disk array types
XP and P9000 disk arrays
Description
Displays cache details, such as the cache size of a given Cache Logical Partition (CLPR). It also displays
the participating RAID Group list. In addition, it can be used to obtain the cache size of each individual
RAID Group of a given CLPR.
Switches
Required. Specifies the array serial number.–dkc <serial #>
Specifies the name of the CLPR group.–clpr <clpr name>
Displays the performance data (-clpr option is ignored).
–perf
Specifies the start time in the format mm.dd.yyyy hh:mm:ss.–st <start time>
Specifies the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>
Specifies the delimiter for the delimited output.
There is no space between -d and the delimiter.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format: <http://
path.to.managementstation:<port>> or <https://path.to.manage-
mentstation>.
–ms <URL>
Specifies a user name and password pair in the format user name:password.–auth <user:passwd>
HP StorageWorks P9000 Performance Advisor Software Command-Line User Interface Reference
Guide 17