HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Specifies a user name and password pair in the format: username:password.–auth <user:passwd>
Prints the usage statement.–?
Examples
dkcs -hr -dkc 30143
dkcs -L -dkc 30143
dkcs -dkc 30143
DKCH
Syntax
dkch [-d<delim>] [-L] [-hr] [-ms<URL>] [-auth <user:passwd>] -dkc <serial
#> [-st <start time> -et <end time>] [-?]
Supported disk array types
XP and P9000 disk arrays.
NOTE:
The output for this command may be different for XP and P9000 disk arrays. For more information,
see DKCH.
Description
Displays the CHIP and ACP utilization history of a given array for a given time range.
Switches
Required. Specifies the array serial number.–dkc <serial#>
Specifies the delimiter for delimited output. There is no space between -d and the de-
limiter character.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://path.to.manage-
mentstation>.
–ms <URL>
Specifies a user name and password pair in the format user name:password.
–-auth <user:pass-
wd>
Specifies the start time in the format mm.dd.yyyy hh:mm:ss.—st <start time>
Specifies the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>
HP StorageWorks P9000 Performance Advisor Software Command-Line User Interface Reference
Guide 19